Streaming With EasyCap 2.0 and VCAM [Tutorial]

[dx91mike]

Hello, I'm gonna show all you how to broadcast in widescreen with Easycap 2.0:

Step 1. Download and install a program called e2esoft VCAM 5.1r (www.e2esoft.cn) "Its not free so your gonna have to buy it or take the free offer for free SN: http://www.e2esoft.cn/webapp/invite.asp make a account then send invite to your friends/followers
Step 2. Make sure your Easycap is plugged in and working!

Step 3. Open up VCAM Manager and go to 'Options' Click on 'Camera Settings'

set video output too 512x288 or any resolution you want. Set Framerate to 30.00 then click apply a few times.

Next go to 'Output' Set the Video Resize Method to 'Stretch to fill' then click Ok then restart VCAM!

Step 4. On VCAM go to 'Source' and click 'Video Capture'

Step 5. Select your capture card and click 'Play capture device'

Step 6. Open up Flash Live Media Encoder 3.0 (google it)

Step 7. Set all your settings on FME (Download the .XML at the broadcast section)

Note: You may not get sound from your capture card, well guess what I have the method to that.

To Get sound to work from your capture card:

Vista users: Go to 'Control Panel' than go to 'Device Manager'. Under 'Universal Serial Bus' Look for

'USB Composite Device' (There maybe more than so look for the bus your capture card in)

Right Click then click 'Uninstall' (You may need to restart...so once your PC is booted up the device will reinstall) You can use this method when you get no sound!

Note: to fix static go to Recording setting than go to the line in settings by double clicking it

Go to Advance Tab and switch Cd Quality to DVD Quality then click ok and apply.

Other Method you can use http://www.amazon.com/Stereo-Female-Adapter-Manhattan-336505/dp/B0009JFF7K/ref=sr_1_3?ie=UTF8&s=electronics&qid=1273387655&sr=8-3 plug it into your mic/line in port (if plugged in as mic jack turn down the volume to 0)

Alright now we got sound working Start up your cast by hitting 'Start'

Hope ya'll like the tutorial :)

[hansch]

I have a little problem,

I get video from tv to pc but there isn't audio, I watched videos and saw that when u choose audio source there should be Syntek 1160( or something that)
but I only have my microphone there,what to do?

hope u understood:D

thanksss

[Rockernumber1]

Is the fullscreen preview response time fast eough to game off?

When I select my easycap(USB 2861 device) as the source and then click play capture device button it gives an already in use error when that's not the case. I had a look at the video recorder option and it actually displays properly in the preview window there.

Did you have this problem on the trial version untill you registered for the full version or is it just a case of it not liking my particular version of Easycap(DC60+) ?

[Rapsody10]

I think this is something you could ask at the Easycap forums
in general works on JTV but unfortunatelly I do not own one so I cannot reproduce it for you

good luck

Raps

[jaswa]

Try them out at justin.tv/p/dub. They are free for first 10,000 Justin broadcasters, then the price is $199. They should work for widescreen...






















Hello, I'm gonna show all you how to broadcast in widescreen with Easycap 2.0:

Step 1. Download and install a program called e2esoft VCAM 4.5 or Older (http://multiupload.com/5IN862PJBQ) "Its not free so your gonna have to buy it or take the free offer for free SN: http://www.e2esoft.cn/webapp/invite.asp make a account then send invite to your friends/fans

Step 2. Make sure your Easycap is plugged in and working!

Step 3. Open up VCAM Manager and go to 'Options' Click on 'Camera Settings'

set video output too 480x288 (That how I have mine setup) or any how you want your resolution. Set Framerate to 30.00 then click apply a few times.

Next go to 'Output' Set the Video Resize Method to 'Resize to fit' then click Ok then restart VCAM!

Step 4. On VCAM go to 'Source' and click 'Video Capture'

Step 5. Select your capture card and click 'Play capture device'

Step 6. Open up Flash Live Media Encoder 3.0 (google it)

Step 7. Set all your settings on FME (Download the .XML at the broadcast section)

Note: You may not get sound from your capture card, well guess what I have the method to that.

To Get sound to work from your capture card:

Vista users: Go to 'Control Panel' than go to 'Device Manager'. Under 'Universal Serial Bus' Look for

'USB Composite Device' (There maybe more than so look for the bus your capture card in)

Right Click then click 'Uninstall' (You may need to restart...so once your PC is booted up the device will reinstall) You can use this method when you get no sound!

Note: to fix static go to Recording setting than go to the line in settings by double clicking it

Go to Advance Tab and switch Cd Quality to DVD Quality then click ok and apply.

Other Method you can use http://www.amazon.com/Stereo-Female-Adapter-Manhattan-336505/dp/B0009JFF7K/ref=sr_1_3?ie=UTF8&s=electronics&qid=1273387655&sr=8-3 plug it into your mic/line in port (if plugged in as mic "TURN DOWN THE VOLUME!")

Alright now we got sound working Start up your cast by hitting 'Start'

Hope ya'll like the tutorial :)